Additional options for greenhouses
Accessories for the structure
ADDITIONAL OPTIONS
Covering
PLASTIC
Large variety of plastic films. We offer different solutions based on the climatic conditions and needs of the crop.
Polycarbonate
We have compact and cellular polycarbonate sheets that are highly resistant and light weight providing an excellent light transmission.
Net
High density polyethylene made nets: insect proof, bird proof, wind breaker and ground covering.
Pre Painted Sheets
Suitable for coverings and cladding because of its mechanical resistance, rigidity and light weight.
Ventilation
Wide range of vents for meeting the climatic requirements of different regions. Designed to create large openings including anti insect net fixing systems and guarantee the required air renewals. Their purpose: achieve a greater amount of air renewals inside the greenhouse to homogenize the climate.
RIDGE VENTS
BUTTERFLY VENTS
Variant of the single supercenit vent with opening on both sides of the roof. It allows better ventilation and air renewal. Highly recommended for warm climates and high humidity concentrations.
Single Supercenit vent
Vent located at the ridge of the greenhouse. Favours a quick evacuation of the hot air and the humidity inside.
RIDGE VENT
Vent turning on top of the span and opening at the gutter. Ideal for temperate climates.
Perimeter vents
ROLL-UP VENT
Perimeter vent with a film roll-up system. It can be installed at the gable end as well as the side of the greenhouse.
Guillotine Vent
Vertical movement opening system. Especially used in structures covered with semi-rigid or rigid materials.
Motorizations
Motorised alternative for automatically run equipments, vents, screens and other equipment. Several options to provide the best adapted solution for each installation. Motors are equipped with a double security limit switch system.
Reinforcements
Auxiliary structure elements for perimeter reinforcement against crop loads.
Ground - pillar reinforcements
Truss reinforcements
Cable systems
K Reinforcements
K shaped reinforcement for bracing the structures lengthwise. This system is used to replace an X-brace when free space is required inside.
X-brace
Tubes or cables made bracing system that guarantees the structural stability of the greenhouse.
Trellising reinforcement
Additional reinforcement for the gable ends of the greenhouse that is used for holding the trellising system when it is installed right under the gutter.
Accesses
Doors
They may be sliding double leaf with a guiding system or pedestrian with a single folding leaf.
Sanitary Room
Designed to create an intermediate area between the greenhouse and the exterior for disease control.
Safety Elements
The safety of our clients is a priority for us. For this reason at vtsproje® we have the equipment required for guaranteeing the safety during the assembly of the greenhouses.
