VTS Proje® Asymmetric (Sawtooth) Plastic Greenhouse Systems; specialized greenhouse structures engineered with asymmetrical roof slopes tailored to local prevailing wind patterns and solar incidence angles to achieve superior natural air extraction. Particularly in warm, semi-arid, and tropical climate zones, they generate an outstanding thermal stack effect with zero electrical ventilation power.

Figure 1: Asymmetric Roof Geometry & Continuous Vertical Ventilation Chimney Detail
Figure 2: Wind Load Distribution & Hot-Dip Galvanized Steel Column Anchors

1. Aerodynamic Design and Natural Ventilation Chimney

In asymmetric greenhouses, roof vents are oriented vertically and positioned facing away from the prevailing wind direction. Heated air is rapidly evacuated without requiring electric exhaust fans, keeping interior temperatures cool and crops protected.

Asymmetric Greenhouse Engineering Advantages:

  • Continuous Vertical Ventilation: Rain-proof ventilation geometry allows continuous air exchange even during heavy rainfall.
  • Zero Wind Load Fatigue: Vents face away from prevailing winds, protecting mechanisms and films from catastrophic storm gust damage.
  • Solar Radiation Optimization: Roof pitch is tailored to geographic latitude for maximum winter light transmission.
  • S280GD Z275 Galvanized Frame: Manufactured to DIN EN 10346 corrosion resistance standards.
  • Effortless Mechanization: High gutter clearances (4.00m – 5.50m) facilitate automated harvesting trolleys and agricultural machinery.

2. Construction and Structural Engineering Standards

Asymmetric greenhouse frames are calculated and certified in strict compliance with EN 13031-1 structural engineering standards. Available in 8.00m and 9.60m span configurations, structures are rapidly erected on-site with high-tensile bolted clamps—requiring zero site welding.

3. Technical Specification Table

Technical Parameter VTS-ASY800 Model VTS-ASY960 Model
Span Width 8.00 m 9.60 m
Gutter Height 4.00 m – 4.50 m 4.50 m – 5.50 m
Ridge Height 6.20 m – 6.80 m 7.00 m – 7.80 m
Steel Material Specification S280GD Z275 Hot-Dip Galvanized S280GD Z275 Hot-Dip Galvanized
Vertical Ventilation Opening 1.50 m (Continuous Motorized Vent) 1.80 m – 2.00 m (Continuous Motorized Vent)
Wind Load Resistance 120 km/h 130 km/h

Request an Asymmetric Greenhouse Engineering Proposal

Contact our engineering department to receive customized static calculations, greenhouse layouts, and turnkey commercial investment budgets.