VTS Proje® Hydroponic Growing Gutter Systems; high-performance cultivation channels extruded on-site up to 100+ meters continuously using our mobile roll-forming fleet directly inside commercial greenhouse projects. Extruding seamless single-piece gutters eliminates coupling joints, preventing water leaks, fertilizer waste, and root contamination, while delivering maximum aeration to substrate slabs.

Figure 1: Hydroponic Gutter Cross-Section & Integrated Drainage Channel Detail

Figure 2: On-Site Mobile Roll-Forming Operation & High-Tensile Suspension Layout

1. Mobile Roll-Forming & Metallurgical Steel Standards

VTS Proje operates an advanced fleet of 7 on-site mobile roll-forming machines, deploying directly to commercial greenhouse construction sites worldwide. Our continuous seamless gutters are profiled from certified high-tensile structural steel conforming to DIN EN 10346 (S280GD and S350GD) standards. By producing single-piece runs exceeding 100 meters gable-to-gable, we eliminate shipping length constraints and expensive container freight delays from Northern Europe.

Standard Crop Gutter Profiles & Applications:

  • Tomato & Vine Crops: Heavy-duty profile with wide base, dual drainage channels, and integrated heating pipe-rail compatibility.
  • Strawberry Swing Gutter Systems: Dynamic oscillating suspension allowing vertical and lateral movement, doubling plant canopy density.
  • Cut Flower & Rose Channels: Precision geometry for uniform root zone oxygenation and complete sterile drain water evacuation.
  • Continuous Single-Piece Lengths: 50 m to 150+ m without splices, couplings, or silicone seals.
  • Corrosion Resistance: Magnelis® ZM310 zinc-aluminum-magnesium coating providing 3x superior protection against acidic fertigation leachates.

2. Anti-Corrosion Protection & Magnelis® ZM310 Coating

Hydroponic irrigation solutions containing nitric and phosphoric acids subject conventional galvanized steel to accelerated degradation. VTS Proje manufactures growing gutters exclusively from Magnelis® ZM310 (310 g/m²) alloyed steel with a food-grade, high-reflectivity polyester topcoat. This composite metallurgy delivers unmatched chemical resistance, prevents zinc phytotoxicity, and provides self-healing cut-edge passivation for over 20 years of operational service life.

  • Chemical Immunity: Complete resistance to concentrated EC fertilizers and low-pH run-off.
  • Reflective White Coating: 85%+ diffuse light reflection back into the crop canopy, maximizing photosynthesis.
  • Hygienic Surface: Ultra-smooth polymer surface prevents algae adhesion and biofilm buildup.
  • Zero Leakage: Seamless monoblock extrusion eliminates joint failures, safeguarding soil and groundwater.

3. Suspension Engineering & Laser-Guided Slope Alignment

Gutter suspension integrity is critical for preventing plant stress and stagnant drain water pockets. VTS Proje supplies custom-engineered galvanized suspension brackets, quick-adjustment hanger wires, and heavy-duty truss hooks. Every gutter line is installed with millimeter-precision laser leveling to maintain a continuous 0.15% to 0.20% longitudinal drainage slope, guaranteeing immediate leachate collection and zero pathogen harboring.

4. Technical Specifications & Engineering Comparison Table

Technical Parameter Tomato & Vine Crop Profile Strawberry Swing Gutter Profile Rose & Cut Flower Profile
Manufacturing Method Continuous On-Site Mobile Roll-Forming Continuous On-Site Mobile Roll-Forming Continuous On-Site Mobile Roll-Forming
Steel Grade & Standard DIN EN 10346 S280GD / S350GD DIN EN 10346 S280GD / S350GD DIN EN 10346 S280GD / S350GD
Protective Coating Magnelis® ZM310 (310 g/m²) + Food-Grade Polyester Magnelis® ZM310 (310 g/m²) + Food-Grade Polyester Magnelis® ZM310 (310 g/m²) + Food-Grade Polyester
Standard Sheet Thickness 0.60 mm – 0.80 mm 0.60 mm – 0.70 mm 0.60 mm – 0.75 mm
Maximum Continuous Length 100+ m without joints 100+ m without joints 100+ m without joints
Drainage System Dual side channels + central aeration rib Integrated low-profile leachate channel Continuous high-flow drain channel
Suspension Spacing Every 4.00 m / 5.00 m trellis post Every 2.00 m / 2.50 m dynamic hanger Every 3.00 m / 4.00 m bracket
Load Capacity 45 kg/m (Crop + Substrate + Water) 30 kg/m 35 kg/m

Request an Engineering Proposal for Growing Gutters

Whether you are an EPC greenhouse contractor or an agricultural investor, contact our engineering team for detailed profiling takeoffs, suspension specifications, and mobile roll-forming deployment.